Porsche Key Replacement Cost
If you've lost your Porsche key it can be stressful. There are many options.
One option is to buy a new key from your local Porsche dealership. However, this can be expensive. Also, you will need to wait for the key.
Switching the ignition switch/lock cylinder
The ignition switch is a vital element of your Porsche's run/start system. If the switch malfunctions it could make your car difficult to start , or even impossible to drive. Changing your porsche key's switch/lock the cylinder is a simple procedure that will save you a significant amount of money and hassle.
The ignition switch is located on the steering column. If it's in good working order you can take it off by using a screwdriver. If it's deteriorating however, you'll need to engage a professional mechanic replace it.
Before you make this choice it is important to think about your budget and whether you can complete the repair yourself. For instance it is a matter of whether you have access to a tool that can replace the switch or you can get the replacement yourself at an auto parts store.
In most instances, the only option that can fix a damaged or worn ignition switch is to replace it. This is especially applicable if your vehicle is equipped with an immobilizer system that requires the old lock cylinder to be removed in order to work.
You'll have to disconnect the battery's negative cable to access the ignition switch. You'll also need to take off any trim panels or covers that block access to the switch.
Once you have removed the trim panels and covers, take out any fasteners that are holding them in place. Then, unwind the locking tab from the lock cylinder using either awl or a pick.
After you've replaced the lock cylinder, you should be able to access the possibility of using your key to unlock the lock and turn off the ignition. You should hear a click on the switch if you've done it right.
Then, test it to ensure that it works properly. Then, you can then proceed to the actual installation if it's working.
Change the ignition switch/lock cylinder is a simple procedure, but it's important to follow the proper procedures. Incorrectly performing the procedure could result in serious problems with your Porsche's security systems. This is why it's always best to let a professional do the task.
Replacing the key fob
You can use the key fob to lock, unlock and start your Porsche at the touch of a one button. However, just like any electronic device, the battery in your key fob will eventually run out of charge and will require replacement.
Replacing the Porsche key can be quite a hassle and should be left to professionals. Experts who specialize in Porsche automobiles will have a thorough understanding of the security system and can give you an accurate estimate of the cost of replacing your keys.
The cost of purchasing a new key will depend on the year and model of your Porsche. For example the 2005 model could be more expensive than one made in 2009.
In general, it's a good idea to keep an extra key on hand since the cost of key replacement could be quite high. This is particularly true for Porsche owners. These cars are extremely high-end and the key fobs provided with them are made to meet the most stringent security standards.
Find a locksmith who can cut a new key for you if you have lost your key. You can also contact the Porsche dealership to request an alternative key. This is an option for those who have the money to purchase a new key at an outlet.
It is recommended to make an appointment with a locksmith who is proficient in cutting and programming keys for Porsche cars after you have found one. This could take up to 20 minutes, but the procedure will depend on the type of car key that must be made and the complexity of the lock.
If the key that you need to replace has an embedded chip that requires programming on-site in order to work in your car. This is because the key comes with transponder chip that is unique to your vehicle.
There are many reasons why your key might need be reprogrammed, including:
Programming is the key
If your key doesn't work or you just want an entirely new one you must have it programmed again. This will make your vehicle start again, and reduce the cost of replacing the ignition switch or lockcylinder.
A locksmith in your auto can do this. It will differ depending on the year and model of your car. However, it is generally less expensive than installing an ignition switch or lockcylinder that is new.
Two security features are built into a Porsche key which is a remote transmitter that makes use of rolling codes as well as an immobilizer that locks it if the code isn't correct. You'll have to have this code updated before the key can function properly.
There are replacement porsche keys to get your Porsche key changed to a different programming. Most manufacturers make it easy to do it yourself, but certain models require specific tools and procedures. It is also recommended to contact the local dealership to find out their process.
You'll have to bring your old key and the VIN number of your car to the dealer to have the key re-programmed. It's a simple procedure that typically takes just several minutes.
The majority of the newer Porsche models come with a chip or transponder. These chips are placed in the key and communicate with a receiver located inside your ignition. These chips can be either non-transponder (no need to program) or transponder (needs to be programmed).
If you're not sure if your Porsche key needs to be programmed again, contact United Locksmith for an estimate. Our team will determine if it is and provide a more precise estimate of the cost.
Another option is to have the key cut at your dealer or through an automotive locksmith. These locksmiths are equipped with specific tools and expertise that are more efficient in creating the replacement key. A duplicate key can usually be made for less than the cost of buying a new one purchased from a dealership.
You can cut down on your Porsche key replacement costs by finding an additional key in your possession or in your home. A locksmith who has experience in Porsche automobiles can also help you to cut your key.
Replacing the battery
Keys are included with every new Porsche. It lets you lock and unlock doors, and it also lets you start the engine. However, your Porsche's key battery might not be functioning as it is supposed to, and you may be seeking a way to replace it.
Modern Porsche keys are powered by an internal battery. They are prone to losing power over time. This can lead to issues like a warning indicator on the dash or trouble starting your car.
If your battery is becoming weak or your key has stopped completely, you must consider having a professional replace it for you. The cost of replacing your car is going to vary according to the make and model. The process is fast and easy.
Before undertaking any replacement of the battery be sure to read the owner's instruction manual. Also, ensure that you examine the polarity of your battery before replacing it.
First take the battery off your key. You can do this by flipping the key upside down and remove the battery from the back.
Next, you will need to remove the emergency key located on the back of the battery. To do this, turn the key towards the back and press the release button that is located at the bottom of the key.
Once the emergency key is removed, you should be in a position to see the black plastic piece that covers the battery. This is the part that will need to be replaced, so make sure to separate it from the rest of the key by pulling on it with a moderate force.
Then, take the battery from its plastic casing with the screwdriver. This will expose the CR2032 battery inside.
Then then, insert the new battery and make sure it is facing the right way. After you have replaced the battery you can put the emergency key back into the fob.
If you are having trouble with your Porsche's key, bring it into the dealership for assistance from a professional. Our team can diagnose the issue and determine if the key should be replaced, reprogrammed or completely replaced.